Engineered for seamless integration with Lithium (LiFePO4, NMC) and Lead-Acid (AGM, GEL, VRLA) energy storage networks across Serbian automotive, logistics, and power infrastructures.
As Serbia solidifies its positioning as Southeast Europe’s primary industrial hub—driven by rapid automotive assembly expansion in Kragujevac, industrial parks in Novi Sad and Niš, heavy mining complexes in Bor and Majdanpek, and major transit developments along Pan-European Corridor X—the demand for robust, high-efficiency power conversion technologies has surged exponentially.
Navigating the dual challenges of legacy infrastructure modernization and next-generation green transition requires specialized charging solutions tailored to both advanced Lithium-ion chemistries (LiFePO4, NMC) and mission-critical Lead-Acid battery fleets (AGM, GEL, VRLA, Flooded Traction). As a direct manufacturer and global supplier, our engineering facility delivers industrial-grade power electronics, DC fast charging stations, and contact-cooled DC/DC converters specifically compliance-certified for Serbian grid standards (EPS 230V/400V 50Hz variations) and extreme Balkan operational environments.
Engineered for vehicle assembly lines, automated logistics centers, and heavy-equipment maintenance facilities, our industrial battery chargers integrate dynamic micro-processor controls that automatically adjust charging curves according to cell chemistry, internal resistance, and real-time thermal readings.
To bridge high-voltage traction batteries with 12V/24V auxiliary power distribution in electric buses, commercial fleets, and heavy mining haulers across East Serbia, our planar-magnetic DC/DC converter series delivers unmatched power density in compact, sealed housings.
Built for high-vibration logistics terminals, processing plants, and outdoor control cabinets, our industrial power supplies range from 19-inch rack enclosures and top-hat DIN-rail configurations to completely potted, hermetically sealed decentralized units.
Detailed overview of core electrical parameters and protection mechanisms implemented across our industrial charger series for Serbian B2B buyers.
| Parameter / Feature | Lithium Series (LiFePO4 / NMC) | Lead-Acid Series (AGM / GEL / Wet) | EV DC Fast Charger Stations |
|---|---|---|---|
| Input Voltage Range | 90-264V AC Single-Phase / 380-480V 3-Phase | 100-240V AC / 400V 3-Phase 50/60Hz | 400V AC ±15% 3-Phase + N + PE (50Hz Grid) |
| Nominal Output Voltages | 12V, 24V, 36V, 48V, 80V, 400V, 800V DC | 12V, 24V, 36V, 48V, 80V DC Traction | 200V - 1000V DC Wide Range Voltage |
| Peak Energy Efficiency | 95.5% - 96.8% | 92.0% - 94.5% | > 96.0% (at nominal power load) |
| Charging Algorithm Profile | CC/CV with Active Cell Balancing & Pre-charge | IUoU / IUIa Multi-stage with Equalization | Dynamic Power Allocation / ISO 15118 Din70121 |
| Communication Interfaces | CAN 2.0B, RS485, Modbus-RTU, Ethernet | RS232 / RS485, Optional CANbus module | OCPP 1.6J / OCPP 2.0.1 JSON, 4G, Ethernet |
| Thermal Management | Internal sensor + external battery temp probe | Auto-temperature compensation curve (-4mV/°C/cell) | Forced air-cooling with intelligent speed control |
| Protection Standards | OVP, OCP, OTP, Short Circuit, Reverse Polarity | OVP, Spark-free connection, Deep discharge recovery | Type A / Type B RCCB, Surge Protection (SPD Class II) |
| Environmental Rating | IP20 (Cabinet) to IP65 (Encapsulated) | IP20 to IP54 Industrial Standard | IP54 / IP55 Outdoor Heavy-Duty Rated |
Tailored power management platforms solving key operational challenges in Serbian industrial centers, transit routes, and commercial facilities.
High-precision battery buffer devices and diagnostic charging stations integrated into automated vehicle assembly lines. Supporting legacy 12V lead systems and new high-voltage EV battery platforms with full DC-Connect data traceability during ECU configuration.
Heavy-duty, fast opportunistic chargers designed for Autonomous Guided Vehicles (AGVs) and forklift fleets operating in multi-shift warehousing hubs. Supporting automated contact plates and rapid LiFePO4 pulse-charging profiles.
IP65-sealed, vibration-hardened chargers and DC/DC conversion units capable of resisting dust, moisture, and ambient shock in copper and mineral extraction sites. Custom thermal throttling ensures continuous uptime in harsh underground environments.
High-power commercial DC EV charging stations (60kW to 240kW) deployed along transit corridors connecting Belgrade, Niš, and Subotica. Dual CCS2/CHAdeMO connectors paired with POS/RFID payment options and OCPP 1.6J management systems.
As a vertically integrated power electronics manufacturer with over 35 years of engineering leadership, we combine core hardware development, firmware design, surface-mount (SMD) and through-hole (THT) PCB assembly, vacuum encapsulation, and automated final testing under one rigorous quality framework.
This complete single-source capability allows us to offer tailored custom modifications for Serbian B2B partners, OEM machinery builders, and system integrators even in small to medium series volumes—ensuring zero reliance on third-party design loops and offering guaranteed spare-part supply for up to 15 years.
Connect directly with our senior application engineers to obtain technical drawings, customized quotation proposals, sample evaluation units, or advice on local grid compatibility.
Inquire Now